In supporting roles everywhere.

Rakks shelving and architectural specialties have been the choice of discerning architects and interior design professionals for over 40 years. Our Shelving systems consist of a family of fully compatible parts including wall mounted standards, pole supports, shelf brackets and accessory components. These component parts can be easily configured to meet a very wide range of shelving and display applications. In both wall-mounted and pole-supported configurations, Rakks features a classic modern design and infinite adjustability without slots or visible hardware. Rakks architectural specialties include mounting brackets for counters, sills, vanities, benches and railings. Our System 700 Hand/Crash rail offers a unique and attractive blend of aluminum and hardwood. Please call us for additional specifications, samples or technical help. Our experienced customer service personnel are eager to assist you. Rakks. In Supporting roles everywhere. 1-800-826-6006 www.rakks.com CONTENTS: Wall Mounted Standards ...............................1 Pole Supports ...............................................2-4 Shelf Support Brackets ...................................5-7 L-Bracket Shelving System ..............................8 Shelves ........................................................9 Counter Support Brackets...............................10-11 Handrail Products .........................................12 How to Specify .............................................13

Rakks Wall Standards .25" .4" .281" RAKKS ARIA 1.125" Access slots (shown above) are cut into the face of the standards (2" from bottom typical), allowing Rakks and Aria style brackets to be inserted or removedfrom the front. Required in recessed applications, or when the ends of the standard are not accessible. WALL STANDARDS Rakks Wall Standards are made of extruded aluminum with precision channels that accept Rakks Shelf Support Brackets. Standards are available in six profiles to meet a variety of surfaces and recessed mounted applications. Standards can be specified in any length up to 12 feet. Standards come with drilled and countersunk holes to accept color matched mounting screws (No. 6 x 1-1/4" Philip's Flat-Head), which are included. When properly installed, screw heads are flush with the back of the channel allowing shelf brackets to be positioned at any point. Standards must be screwed into studs, blocking, or into wall anchors sized for No. 6 screws. Toggler ® Brand AF-6 and SnapSkru TM wall anchors are recommended. Brackets should be mounted at least 6" from the top of the standard to better distribute the load. Shelf brackets can be mounted at the very bottom of a standard. SPECIFICATIONS MATERIAL: 6063-T6 extruded aluminum LENGTH: Available in lengths up to 12' FINISH: Clear anodized, black anodized, white powdercoat. Custom anodized and powder-coated finishes available CHANNELS: 9/32" opening accepts all styles of Rakks shelf support brackets CAPACITY: Load capacities are determined by bracket type and size (see pages 5-7) MODEL DESCRIPTION APPLICATION SCREW HOLES: On center spacing is 12" typical HARDWARE: No. 6 x 1-1/4" Philip's Flat-Head color matched screws are included OPTIONS: Access slots when required Non-ferrous screws Longer (2") screws Wall anchors SC-XXX "C" Style Wall Standard Surface or recessed mounted SM-XXX "M" Style Wall Standard Surface mounted only SE-XXX "E" Style Wall Standard Stud mounted to accept 5/8" wallboard SG-XXX "G" Style Wall Standard Surface mounted over 1/4" mirror or panels SD-XXX "D" Style Wall Standard Surface mounted - for maximum adjustment SQ2-XXX "Q" Style Wall Standard Surface mounted - Heavy Duty Compatible with BR and TB brackets only XXX - Denotes length in inches. Specify finish clear anodized, black anodized, white powder-coat or custom. WALL STANDARDS .700" .535" C-STANDARD. Our most basic extruded aluminum wall standard used for either surface or recessed mounted applications. 1.750" .535" M-STANDARD. A decorative profile used for surface mounted applications. The 1-3/4" wide profile and flared sides make a dramatic vertical statement. E-STANDARD. An extruded aluminum wall standard designed to be recessed mounted between 5/8" drywall panels. The front flanges cover the rough-cut edge of the drywall. .250" 1.250" .535" G-STANDARD. Designed to be mounted between 1/4" glass mirror or wood panels. The front flanges cover the panel edge. 1.750" .535" D-STANDARD. Two channels allow for independent adjustment of shelves in both continuous and staggered configurations. 1.625" .625" Q-STANDARD. A decorative profile designed for heavy-duty application. With Rakks Style Support Brackets (BR & TB) load capacities are increased by 25%. Supplied with 2" screws and twin mounting holes at each end. Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com .700" 1" .625" 1

2 Rakks Pole Supports 1.5" 1.5" 2" 1.5" 2" 1" 1.5" 1.5" 2" 1" RAKKS POLES PL WALL STORAGE POLE. Used to create wall units with shelves and/or cabinets in conjunction with a supporting wall. Poles with spring loaded hardware install under compression between the floor and ceiling. Front channels accept shelf brackets; side channels accept 1/4-20 screws to mount cabinets. PC4 COMPRESSION SUPPORT POLE. Used to create shelving units with or without a supporting wall. Adjustable mounts allow poles to be installed under compression between floor and ceiling. When used as a room divider, side channels can accept 1/4" decorative panels. PC2 COMPRESSION SUPPORT POLE. Similar to the PC4 pole with side channels that accept 1/4-20 screws to attach L-Brackets and cabinets. Front and back C channels accept all Rakks brackets and pole accessories. PS4 SINGLE SUPPORT POLE. Used for floor-to-ceiling or through-counter applications in laboratories and retail stores. Poles can also be used to create framing and panel systems incorporating 1/4" decorative panels. PD6 DOUBLE SUPPORT POLE. Provides additional strength and versatility and, similar to PC poles, can be installed under compression. Double channels allow for independent support and adjustability of shelves. Extra strength provides maximum rigidity when used in integrated applications. THREADED INSERT. Used to create a threaded channel in any pole. Facilitates the installation of cabinets or other components using 1/4-20 screws. Secures into pole channel with set-screws. POLE SUPPORTS Rakks support poles are made of extruded aluminum with channels that accept Rakks Shelf Support Brackets. Poles are available in five profiles to meet a wide range of storage and shelving applications. The infinite adjustability of shelf brackets eliminates the need to level or shim poles. Anodized aluminum finishes provide a clean and chemically resistant finish. RAKKS POLE CONFIGURATIONS OPTIONAL TIE BRACKET A B C D Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com 3.5" 1/4-20 set screws Anchor Brackets are used to secure poles to floor, ceiling or to make pole-topole connections.

Rakks Pole Mounting Hardware Threaded mounts are drilled so that they can be easily screwed into the ceiling. POLE MOUNTING CONFIGURATIONS A. Spring compression with supporting wall (floor-to-ceiling) PL poles only. Note: loads must be rear facing against wall. B. Threaded compression with or without supporting wall (floor-to-ceiling). Note: loads must be balanced or mounts must be fastened at ceiling. C. Tied back to a supporting wall with tie-bracket. Note: length of tie-bracket must equal shelf depth. D. Integrated into counter or laboratory casework. Note: maximum recommended shelf height is 42" above counter. E. Secured by anchor brackets and screws (floor-to-ceiling). F. L-brackets tied to a supporting wall with mitered tie pole and anchor brackets. G. Rakks brackets tied back to a supporting wall with mitered tie-pole and anchor brackets. RAKKS POLE CONFIGURATIONS E F G OPTIONAL TIE BRACKET OR TIE POLE POLE MOUNTING HARDWARE SPRING COMPRESSION KIT. Used with PL poles for installation between the floor and ceiling. 1-1/8" x 1-5/8" x 11-1/2" rectangular tube slides over pole. Spring and spacers allow for up to 4" overall adjustment. Rubber top and bottom pads protect ceiling and floor. Note: poles should be cut 3" shorter than the finished floor-to-ceiling height. THREADED MOUNTS. Install into inserts at the top and bottom of PC2, PC4 and PD6 poles for installation between floor and ceiling. These nonskid, non-marking mounts allow for up to 2" overall adjustment. Note: poles should be cut 3" shorter than the finished floor-to-ceiling height. ANCHOR BRACKETS. One leg of these L-shaped brackets slides into the pole channel and is secured with 1/4-20 set screws. The other leg can be used to anchor poles to the floor, ceiling or wall. Use two AB-0035 brackets for pole-toceiling connections. AB-0202 brackets can be used to make 90-degree pole-topole connections. MITERED TIE-POLE. Used to secure poles to a wall. Mitered tie-poles are available in any specified length. AB- 0202 brackets are used for pole-to-pole connections. AB-PC or AB-PL brackets provide an attractive connection back to the wall. Note: if shelves do not touch the wall, additional bracing may be required to prevent side-to-side racking. TIE-BRACKET. Used to secure any Rakks pole to a wall. Tie-brackets have a PVC flange at the end that is screwed to the wall. One tie-bracket should be located at the top of the pole. Additional tie-brackets can be added for greater stability. Note: tie-brackets must be specified so that shelves touch the wall. GROMMETS. Facilitate installation of PS4 and PD6 poles in through-counter installations. These machined Delrin inserts are epoxied into round holes cut into counter tops. Eliminates need to cut square or rectangular holes. Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com 1.625" 1-5/8" 2" 3.5" AB-PC AB-PC4C OR AB-PL 1.125" 1-1/8" 11-1/2" 11.5" 2" 1.70" 2" 3.5" .25" .7" .7" AB-0202 2.5" 3.5" 1" 3

4 Rakks Pole Components 1.25" 1" POLE COMPONENTS .5" .25" .125" 4" SPLINE CONNECTOR. Join sections of poles when floor-to-ceiling heights exceed inventoried lengths. Splines slide into pole channels and are secured using four set screws. Two splines required for each connection. CHANNEL NUT PLATES. Used for mounting accessories to poles. NP-0832 nut plate can be easily installed or removed from the front of the pole. NP-0420 nut plate must slide into the end of the pole or into an access slot and should be used where a more secure attachment is required. PANEL FRAMING CHANNELS. Used with Rakks poles to support and frame 1/4" decorative panels. Framing channels are manufactured to order to fit any panel width up to 4'. They lock securely into the pole and are held in place by channel nut plates. Note: panels should be 3/4" wider than inside pole-to-pole dimensions. DOOR HINGES. Pole mounted door hinges can accommodate 1/4" glass and 3/4" wood doors up to 18" wide. Hinges can be configured for single or double door applications. Available in polished aluminum only. CHANNEL COVERS. PVC extrusion snaps into pole channels to cover opening for improved sanitation and cleaning. Available in 8' lengths in translucent and black PVC. POLE CORNER ADAPTER. This adapter screws into the side of PL or PC2 poles and accepts a shelf bracket. It should be used only in corner conditions. LAMP BRACKET. Accepts drafting lamps with 1/2" diameter bottom shaft. Available in black or clear anodized aluminum. POLE COMPONENTS Rakks Pole Components expand and enhance the configuration options of our pole-supported systems. Using anchor brackets, spline connectors, and channel nuts, poles can be joined or supported in an infinite variety of combinations. Custom structures and displays can be easily created using readily available components MODEL DESCRIPTION LENGTHS CONFIGURATION PC2-XXX Compression pole for L-bracket Up to 12' Floor-to-ceiling B, C, E, F, G PC4-XXX Compression support pole Up to 12' Floor-to-ceiling B, C, E, G PS4-XXX Single support pole Up to 12' Floor-to-ceiling C, D, E, G PD6-XXX Double support pole Up to 16' Floor-to-ceiling B, C, D, E, G PL-408/PL-409 Wall storage support pole Up to 11' Floor-to-ceiling A, C, F, G with 2' extension Poles are stocked in clear and black anodized finishes. PC2, PC4 and PL poles are also stocked in white powder-coat. XXX - denotes length in inches. MODEL DESCRIPTION APPLICATION PL-HDW Spring Compression Kit PL pole floor-to-ceiling Finish to match PL poles PM-PC16 Mount and Insert PC2/PC4 Threaded compression Black or clear 3" stem PM-PD13 Mount and Insert Threaded compression for PD6 Black nylon only 3-1/2" stem AB-0202 Anchor Bracket 2" x 2" Pole-to-pole connections 2 tapped holes AB-0035 Anchor Bracket 3-1/2" x 3-1/2" Pole-to-ceiling connections 2 tapped & 2 through holes AB-PC Tie-Pole to Wall Bracket 1-1/2" x 1" Decorative bracket for PC2/PC4 1 tapped & 1 through hole AB-PL Tie-Pole to Wall Bracket 1-1/2" x 1-1/8" Decorative bracket for PL/PS4 1 tapped & 1 through hole MT-XXX Mitered Tie-Pole Pole-to-wall connection Profile & length as specified BT-XXX Tie Bracket 1-1/4" Pole-to-wall connection Length & finish as specified BT2-XX Tie Bracket 2" Pole-to-wall connection Length & finish as specified PG-PS4 Grommet for PS4 Pole - Black Integrated configuration (Type D) Fits 2-1/2" diameter hole PG-PD6 Grommet for PD6 Pole - Black Integrated configuration (Type D) Fits 3-1/2" diameter hole SP-001 Spline Connector Joins poles end-to-end Use 2 per pole SP-PC4 Spline Connector for PC4 Joins PC4 pole end-to-end Use 2 per pole NP-0832 Channel Nut w/ 8-32 screw Installs from the front of pole Steel w/ 1 tapped hole NP-0420 Channel Nut w/1/4-20 screw Installs from the end of pole Steel w/ 1 tapped hole PET-XXX Threaded Insert Installs into poles channels Lengths up to 8' PC-SC-XXX Panel Framing Channel Kit Supports panels between poles Length as specified PH-G25 Hinge Kit for 1/4" glass doors Attach glass doors to poles Single or double PH-W75 Hinge Kit for 3/4" wood doors Attach wood doors to poles Single or double CC-096 Channel Cover 96" Covers open channel Black or transluscent PL-BA Bracket Adapter Corner condition PL or PC2 Finish to match poles LB-025 Lamp Bracket for 1/2" Stem Attach lamp to poles or standards Clear or black anodized EC-0102 End Cap for PS4 Pole Covers end of pole Black only EC-0202 End Cover for PD6 Pole Covers end of pole Black only PF-00B Bottom Pad for PL Pole Protects floor / covers end Black, white, or gray PF-00T Top Pad for PL-HDW Protects ceiling Black, white, or gray Note: Contact Rakks Customer Service for additional information and specifications. XXX denotes length in inches. SPECIFICATION Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com

Rakks Shelf Supporting Brackets The patented Rakks locking system allows for the precise location of shelves at any height. Universal Brackets insert into Standards or Poles, turn and lock into place. SHELF SUPPORT BRACKETS Manufactured from extruded aluminum and available in attractive anodized finishes, Rakks shelf support brackets feature infinite adjustability and attach to standards and poles supports without slots or visible hardware. Available in five basic styles, Rakks, Universal, Aria, Tray, and Floating brackets have a distinctive look and reflect a functional design. Aria brackets are stocked in clear and black anodized aluminum. All other brackets are stocked in clear anodized, black anodized and white powdercoat finish. MODEL DESCRIPTION USEABLE WIDTH DEPTH LOAD LENGTH CAPACITY BR-004 Rakks Style for 4" Shelf 3-1/4" 1/4" 1-1/4" 100# BR-006 Rakks Style for 6" Shelf 5-1/4" 1/4" 1-1/4" 100# BR-008 Rakks Style for 8" Shelf 7-1/4" 1/4" 1-1/4" 100# BR-010 Rakks Style for 10" Shelf 9-1/4" 1/4" 1-1/4" 75# BR2-10 Heavy Duty for 10" Shelf 9-1/4" 1/4" 2" 100# BR-012 Rakks Style for 12" Shelf 11-1/4" 1/4" 1-1/4" 60# BR2-12 Heavy Duty for 12" Shelf 11-1/4" 1/4" 2" 100# TB212-LAB T-style Lab Bracket 11" 1" 2-1/8" 100# BR-014 Rakks Style for 14" Shelf 13-1/4" 1/4" 1-1/4" 55# BR2-14 Heavy Duty for 14" Shelf 13-1/4" 1/4" 2" 85# BR-016 Rakks Style for 16" Shelf 15-1/4" 1/4" 1-1/4" 50# BR2-16 Heavy Duty for 16" Shelf 15-1/4" 1/4" 2" 80# BR2-18 Rakks Style for 18" Shelf 17-1/4" 1/4" 2" 70# BR2-24 Rakks Style for 24" Shelf 22-1/2" 1/4" 2" 45# TB-XXX T Option for BR Bracket as above 1" 1-3/8" as above TB2-XX T Option for BR2 Bracket as above 1" 2-1/8" as above Load capacities represent a uniformly distributed, static load, per bracket. Spacing of brackets should take into consideration both anticipated loads and shelf deflection characteristics. BRACKETS RAKKS STYLE. Our signature Rakks Style bracket features a distinctive rectangular bar design that can support shelves up to 24" deep. Rakks Style brackets are designed to "underhang" the shelf (see chart for useable length). These brackets can be specified and made to order in ANY useable length up to 24". Depending on length and load capacities, brackets are manufactured in 1-1/4" and 2" heights. T-STYLE RAKKS T-STYLE. T-style brackets have a PVC shelf coupler extrusion that is pinned to the top of the bracket creating a 1" wide horizontal support surface. The horizontal surface is predrilled with holes allowing shelves to be screwed to the bracket. Any Rakks Style bracket can be supplied in the T-style. PVC extrusion is available in white, black or translucent. RAKKS T-STYLE LAB BRACKET. A heavy duty tapered bracket with PVC flange. Available in one size only for shelf depths from 11"-14". BU-009 BU-012 UNIVERSAL. This tapered aluminum bracket is available in two sizes to support wood or glass shelves from 9" to 14" deep. The 1" horizontal surface is predrilled with holes allowing shelves to be screwed to the bracket. ARIA DISPLAY BRACKET. A two piece bracket that can support glass or wood shelves of various thicknesses up to 12" deep. This elegant display comes in two configurations, one with matching top and bottom, the other using a hold-down bracket on the top. Available in clear and black anodized aluminum with color matched set screws. Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com 5" BA-001 1.375" T-STYLE LAB 0.25" 0.25" 1" 1" 1" 1.25" 2" 1.38" 2.13" 2" GLASS SHELF HOLD-DOWN SOLD SEPERATELY BA-002 5

6 Rakks Shelf Support Brackets 1.125" 2" .625" .625" .875" .5" .25" 8" 1" .25" .3" 1" ACCESSORIES TRAY BRACKET. A minimal profile, medium-duty support for shelves from 6" to 12" deep. Left, right and center brackets support shelves from the ends. When used with 1" thick shelves they create a near "floating" appearance. FLOATING DISPLAY BRACKET. Fits into pre-cut channel of shelf to give a "floating" appearance with no visible hardware. Used for light-duty display applications with 4" to 12" deep wood or acrylic shelves. RETAINING PIN OPTION. Rakks brackets with retaining pins provide an extra measure of security, keeping shelves from shifting on the brackets. Wood shelves with 1/4" holes or slots fit over the pins. When supporting long shelves across several brackets, only the outside brackets need retaining pins. Double-sided foam tape is also effective in securing shelves to the brackets. BR BOOKEND. Rakks Style brackets make excellent bookends. Specify bookends one size smaller than the shelf depth. Note: bookends must be installed in sequence with (and at the same time as) the shelf brackets. UNIVERSAL BOOKEND. A wire formed bookend that can be installed into the front of standards or poles at any point. Powder coated silver, black, and white to match other components. Available in 8" depth only. SHELF COUPLER. Used with Rakks Style brackets to allow two shelves to join at a bracket. Couplers (two per bracket) are only required on the bracket where the two shelves join. Pre-drilled holes in the couplers allow the shelves to be screwed into place. Available in white, black and translucent. SHELF RESTS. These transparent polyurethane pads cushion glass or wood shelves and keep them from sliding on the brackets. SHELF SUPPORT BRACKETS Rakks Shelf Support brackets can be used for a wide range of applications. Our signature Rakks Style bracket combines elegant design with exceptional flexibility and versatility. They can be used to support shelves from 4" to 24" deep and when specified in the heavy duty configuration are a perfect choice for oversized books, laboratory equipment, catalogs or heavy files. Universal Brackets feature a functional easy-to-use design for medium-duty storage, including books. Aria, Floating, and Tray brackets have a distinctive look for light to medium-duty display and merchandising applications. MODEL DESCRIPTION USEABLE WIDTH DEPTH LOAD LENGTH CAPACITY BU-009 Universal Bracket for 9" - 11" Shelf 9" 1" 2" 70# BU-012 Universal Bracket for 12" - 14" Shelf 11-3/4" 1" 2" 60# BA-001 Aria Display Bracket for 5" - 12" Shelf 5" 3/4" 2-3/4" 50# + ST BA-002 Aria Display Bracket w/ Hold Down 5" 3/4" 1-5/8" 50# + ST BR-GH1 Glass Hold Down only 7/8" 3/4" 1/4" n/a BTR-L-XX Tray Bracket Left 6-1/8" to 12-1/8" 5/8" 1-1/8" 45# in 2" increments BTR-R-XX Tray Bracket Right 6-1/8" to 12-1/8" 5/8" 1-1/8" 45# in 2" increments BTR-C-XX Tray Bracket Center 6-1/8" to 12-1/8" 5/8" 1-1/8" 45# in 2" increments BF-04 Floating Display Bracket for 4" Shelf 3-1/2" 1/4" 1/2" 25# BF-06 Floating Bracket for 6" Shelf 5" 1/4" 1/2" 25# BF-08 Floating Display Bracket for 8" Shelf 7" 1/4" 1/2" 25# BF-10 Floating Display Bracket for 10"-12" Shelf 9" 1/4" 1/2" 20# BL-XX L-Bracket - see page 8 for complete specifications J-Hangbar Bolt on Bracket. Load capacities represent a uniformly distributed, static load, per bracket. Spacing of brackets should take into consideration both anticipated loads and shelf deflection characteristics. ST = Shelf Thickness Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com

Rakks Shelf Support Brackets SHELF SUPPORT BRACKETS Rakks shelving can be configured and accessorized to satisfy the most demanding merchandising and storage applications. Face-outs, hangbars, slanted displays, notched brackets, and waterfalls can be manufactured to your exact specifications. Our metal fabrication and machining capability allow for quick turn-around and reasonable costs. MODEL DESCRIPTION APPLICATION SPECIFICATION BR-RP Retaining Pin Option Secures shelves to bracket 5/32" pin extends 1/4" for Rakks Brackets BR-NOTCHED Notched Option Accepts hangbar, Depth and location for Rakks Brackets stiffener or shelf lip as specified BR-SLANTED Slanted Option Display literature Length and angle for Rakks Bracket or product as specified BR-HANGBAR 1-1/4" X 1/4" Hangbar or shelf stiffener Lengths up to 144" Rectangular Bar Stock BR2-HANGBAR 2" X 1/4" Shelf lip Lengths up to 144" Rectangular Bar Stock BJ-HANGBAR J-Hangbar Hanging rod for 1-1/2" x 3/4" merchandising or closet lengths up to 144" BJ-BB J-Hangbar Bracket Attach J-Hangbar to sides 1-1/2" x 1-1/2" x 1/4" Bolt-On of PL or PC2 pole w/ 2 holes BJ-OL & J-Hangbar Offset Attach to front of pole 1-3/8" offset BJ-OR Bracket left/right left/right side BJ-0C or center "T" BJ-0C attaches to front of pole where sections join BR-WATERFALL Waterfall option Merchandising and display Specify length, angle for Rakks Bracket & pin location BP-008 Universal Wire Bookend installs from Powder-coated steel to match Bookend - 8" front of standard TB2-18C-DESK Reinforced Bracket for Extra support for 20" - 24" 18" bracket can worksurface worksurface support 120# TU-201 PVC Shelf Coupler Use 2 per bracket 1" flange. Drilled for where shelves join #6 screws BMP-1 Stick-On Shelf Rest Cushion shelves and Use 2 or more per bracket keep them from sliding Most brackets are stocked in clear anodized, black anodized and white powder-coated finishes. Hangbars are stocked in clear anodized only. Custom finishes are available for all parts. CUSTOM BRACKETS HANGBAR. Sold in cut-to-length sizes up to 12 feet, this 1-1/4" x 1/4" clear anodized bar fits into notched brackets. Bracket length and notch location made as specified. J-HANGBAR. This attractive profile provides extra stiffness for wide spans or heavy clothing. Can be mounted at the end of notched BR2 bracket (shown) or supported on J-Bar Brackets described below. J-BOLT-ON BRACKET. Used to attach J-hangbar to poles. The bolton bracket screws to the side of PL or PC2 poles. Available for left and right configurations. WIRE FACE OUT BRACKET. Fits over BR-Hangbar and can be used for the merchandising and point display of card mounted product. Available in one size, 8" silver powder coat only. FACE OUT. Used for merchandising or display, Rakks brackets with retaining pins make excellent face-outs. NOTCHED BRACKET SHELF STIFFENER. Provides additional support under wood or glass shelves to accommodate wide spans or control shelf deflection. A 1-1/4" x 1/4" clear anodized bar fits into notched brackets. Bracket length and notch location made as specified. SLANTED BRACKET. Rakks style brackets can be made to lock in at any angle (up or down). Retaining pin at end keeps wood shelves in place. When used with glass or aluminum shelves, brackets can be notched at end to accept 2" x 1/4" shelf lip bar. WATERFALL BRACKET. Used for merchandising and display, brackets can be made to any specified length, angle and pin configuration. DESK BRACKET. Used to support work-surfaces from 20" - 24" deep - these T-style brackets are reinforced for added strength. Rated at 120# per bracket. Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com 1.25" .25" 1.5" 12.5" .75" BOLT-ON 1.25" .25" 8" 18" 1.5" 2" 7

Rakks L-Bracket Shelving System L-BRACKETS Custom L Bracket pg. 8 8 1.5" .19" AB-PC4C AB-PC 1.5" .937" AB-0202 1.375" PC2 SUPPORT POLE. Threaded side channels accept 1/4-20 screws that are used to mount L-Brackets and/or cabinets to poles. Front and back C channels accept all other Rakks brackets and pole accessories. PC2 poles can be installed between the floor and ceiling under compression or tied back to the wall. See pages 2-3 for additional information. L-BRACKET. L-Brackets attach to PC2 poles at any height with one 1/4-20 screw. When used with 3⁄4" thick shelves the mounting hardware is hidden. Wood shelves can be screwed to the brackets using pre-drilled and countersunk holes. Note: shelves should be cut 1/2" shorter than the inside pole-to-pole opening. L-BRACKET WITH RETAINING PIN. L-Brackets can be ordered with retaining pins on each end to hold Rakks extruded aluminum shelves securely in place. MITERED TIE-POLE. Mitered tie-poles can be used in applications where floor to ceiling installation is not practical or desired. Pole-to-pole and pole-to-wall connections are made using anchor brackets secured with setscrews. Tie-pole kits are sized to accommodate all L-Bracket sizes. CUSTOM L-BRACKET. Custom L-Brackets can be manufactured in a variety of lengths and asymmetric configurations. Slanted brackets are ideal for merchandising and display. Offset brackets can be used to support worksurfaces or shelves of different depths. L-BRACKETS Rakks L-Bracket system (pat. pend.) provides unparalleled design flexibility, strength and value. Available in both floor-to-ceiling and wall-supported configurations this new design features quick and infinite shelf adjustment utilizing one hidden screw. Brackets support wood, glass, or aluminum shelves from 8" to 24" deep in 2-inch increments. Cabinets can be easily attached to the poles to create attractive wall storage units or merchandising displays. SPECIFICATIONS SIZE: Poles: 1-1 /2" square in lengths up to 144" Brackets: in lengths from 8"-24" in 2-inch increments HOLES: One 9/32" hole is predrilled and countersunk to accept a 1/4-20 x 1/2" flat head screw - included. Supporting lip has two holes drilled and countersunk for #6 screws used to secure wood shelves to brackets MATERIAL: 6063-T6 extruded aluminum FINISH: Clear, black anodized, white powder-coat CAPACITY: 150 pounds per pair. All depths OPTIONS: Retaining pins, custom lengths, angles, configurations MODEL DESCRIPTION APPLICATION SPECIFICATION PC2-XXX PC2 Support Pole Floor to ceiling or tied back to wall Lengths up to 144" BL-XX L-Bracket Shelf Support Supports shelves 8" - 24" deep Rated load is 150# per pair PC2-MT-XX Mitered Tie-Pole Kit Anchors PC2 pole to wall Lengths = shelf depth plus 1-1/2" BL-RP Retaining Pin Option Secures aluminum shelf to bracket 5/32" steel pins located at each end BL-SLANTED Slanted Option Merchandising or display Length and angle for L-Bracket as specified BL-OFFSET Offset Option Supports varying shelf depths Length and offset for L-Bracket as specified L-Brackets screw to poles at any height. CAB-HDW Mounting Hardware Attaches cabinets to poles 1/4-20 screws 3/8" + thickness of side BMP-1 Stick-on Shelf Rests Cushion shelves and keep Use two or more per bracket them from sliding Rakks | Rangine Corporation | 330 Reservoir Street | Needham, MA 02494 | 800-826-6006 | www.rakks.com